Pianos regularly make movers annual list of products that are most frequently damaged. Grand pianos are especially problematic. Practicing the following treatments for dismantling, padding and loading grand pianos will avoid damage, lower claims expenditure, and enhance client satisfaction.
1) At least three people are required to deal with a baby grand piano. If the baby grand piano needs to increase or down stairs or if a complete or concert grand piano requires to be transferred, a minimum of four individuals are required.
2) Always finish a accurate and extensive inventory. It might be needed or preferable to utilize a visual inventory to adequately describe and show pre-existing damage.
3) As different parts are dismantled, please place all hardware in an effectively identified parts bag and then put the parts bag in a "Parts Box".
4) Eliminate the music rack (lyre) from its track by pulling it towards the keyboard. Wrap it in a clean furniture pad.
5) Detach the lid by getting rid of the hinge pins. Have a single person wiggle the lid, holding it opposite the hinge, while a second person works the pin loose. Please be cautious not to harm the wood with the pliers or with the pin itself. If required, cover the jaws of the pliers with a little fabric to assist avoid damage to the wood. Wrap the cover in a clean furniture pad.
6) Remove the prop that holds the cover open and cover it in a tidy furnishings pad. The prop has a hinge pin and remains in 2 pieces.
7) Get rid of the pedal assembly and cover it in a tidy furnishings pad. The braces at the back of the assembly rest in slots at each end. When getting rid of the screws, please be mindful not to drop the braces. In addition, please be especially mindful with the push-rods so that they will not get bent. As you face the piano, number the push-rods from left to right as "1", "2", and "3", by placing a piece of masking tape with the appropriate number on each rod. Keep in mind: If masking tape is not available, please use correctly labeled parts bags for this purpose. When reassembling at location, please make certain to put the rods in the right order so that the pedals will work correctly.
8) Pad the piano by positioning a clean rolled furniture pad (stretch-wrap the pad to avoid it from unrolling) on the cover of the keyboard to prevent it from tumbling open while you deal with the piano. Cover the top of the piano with two tidy furniture pads, nicely folded around the keyboard. Use rubber bands to protect the anchor pads. Keep in mind: Please guarantee that the surface area of the piano is dust-free before padding it. Padding an extremely polished surface that is dusty might cause fine scratches, specifically on a black lacquer finish.
9) Position a piano board and attach the straps so that it is prepared to get the piano. The raised brace on the piano board should be at the keyboard end of the piano.
10) Eliminate the left front leg by placing one individual below the piano at the left end of the keyboard. Be sure to have two people raising the corner of the piano while the third individual gets rid of the leg. Keep in mind: Please be sure to note which legs were gotten rid of from which positions given that some pianos have legs that are not interchangeable.
11) Place the piano on the piano board by decreasing the "leg-less" end onto the board. Please be sure to lift the entire piano a little while finishing this maneuver to avoid undue pressure on the staying, connected legs as the piano tips. Be sure that the piano is focused snugly against the brace at the end of the piano board.
12) Get rid of the 2 staying legs and wrap them in clean furniture pads. These legs are kept in location by a "key and slot" arrangement. To eliminate the leg, slide it inward toward the center of the piano up until click it comes out of the slot.
13) Protect the piano to the piano board by bringing completions of the straps together and fastening them. Location folded burlap pads over the furnishings pads however under the straps to offer extra security to the edges of the piano. To avoid the strap near the narrow end of the piano from slipping off, connect the loose ends of the 2 straps together.
14) To move the piano over a flat, level surface area, tilt the piano and piano board and location a four-wheel dolly under the center of the piano board.
15) To move the piano up or down stairs, utilize the piano board as a skid. After adequately padding the stairs for security against residence damage, place the keyboard end of the piano towards the bottom of the stairs. Connect a hump strap to the top end of the piano board to avoid the piano from slipping.
16) To fill the piano, leave it on the piano board and place it in a tier as the first base product with the keyboard dealing with the wall of the preceding tier. The finest location to pack the padded cover is between the piano and the preceding tier or between the wall and why not find out more the piano.
Although grand pianos represent a substantial obstacle, they can be moved without damage by utilizing good sense and practicing the procedures noted above.